HDMI Over Fiber Optic (FO) Extender Converter VORTEX 4K 30hz KVM up to 20km

HDMI over Fiber Optic (FO) 4K 30hz up to 20km Extender Converter Vortex

Features
1.Long distance transmission of 3G/HD-SDI video and audio signals through optical fiber, up to 3-20KM (default 3KM)
2.HD video signal resolution up to 1920*1080P@60Hz
3.Support all digital lossless transmission, 8-channel embedded audio and video synchronous transmission
4.Support local output, the remote end support two-way synchronous output
5.Support PAL/NTSC, strong compatibility, able to automatically identify and configure various display modes
6.Support plug and play and hot plug
7.Built-in automatic adjustment system, make the image smooth, clear and stable
8.Built-in ESD protection system
9.Simple to install, plug and play
Troubleshooting
10. Connector HDMI 4K30hz : SC

1.The red light (PWR) is not bright or the brightness is low, Check whether the power adapter is normal
2.When TX green light (STA) is not on; Check the signal source; The green light stays on indicates regular work.
3.RX green light (STA) is not on, check whether the optical fiber module of the TX contacts normally; The green light (STA) is not on when there is no signal from the TX; Long light indicates that TX and RX work normally.
4.If there is no image on the display, check whether the display selects the correct channel input
Specification
Technical Norms:SMPTE standard
Video bit rate:MAX 3.2 GB/Second
Interface:BNC
Input/output cable specification:≤150m（Belden 1694A cable standard）
Video input/output impedance:75Ω
Video input/output voltage:1Vpp;Min:0.5Vpp/Max:1.5Vpp
Differential gain (10% ~ 90% APL):<1%
SDI resolution
720P@50,[email protected],1080i@23/24/30/50/59.94,[email protected]/24/30/50/60
Support SDI specification
270Mbps(SD-SDI), 1.485Gbps/M(HD-SDI)
SMPTE425M3Gb/s Mapping(3G-SDI）
SMPTE424M 3Gb/s serial
interface:(3G-SDI)
Optical fiber interface:SC
Fiber type:Single mode single fiber
wavelength:Single mode 1310nm；1550nm
Max transmission distance Default: 3KM；Max: 20KM
Power:DC 5~12V/1A
Power Consumption:MAX 5W
Temperature:Operating temperature: -20℃ ~ +70℃